Every time you turn on the device, you must carefully check it to see if there are other

abnormalities in the equipment. If there is no abnormality, you can start and use it

normally. The machine must readjust its body and hands when it is running. All these parts

cannot be approached or touched.

Usage of automatic packaging machine:

1. When the automatic packaging machine is in use, the power switch needs to be turned on.The power selection switch points to vacuum for vacuum sealing, and for vacuum filling to vacuum filling and sealing.

2. Put the plastic bag containing the articles in the vacuum chamber, and place the bag mouth neatly on the heat sealing strip.

3. Press down the cover, and the exhaust indicator on the panel lights up. The vacuum pump starts to pump, and the cover is automatically sucked. The vacuum knob can adjust the vacuum level according to the packaging requirements. When adjusting, the visual scale is from low to high, and the amplitude is required. small.

4. When the pumping reaches the set time, the pumping indicator light goes out and the inflation indicator light is on to indicate the start of inflation. The inflation knob can adjust the length of the inflation time. If inflation is not required, turn the power switch to the vacuum position, and the program will automatically Enter the vacuum packaging, the inflation indicator light goes out.

5. When the air is pumped or inflated, the indicator light will go out and the heat sealing indicator light will be on, and the sealing process will be entered. The panel is equipped with heat sealing time and temperature adjustment knobs to adapt to different thickness materials. When adjusting the time and temperature, turn The moving range should be small to prevent the heat-sealing temperature from suddenly increasing and burning out the heat-sealing parts.

6. When the set heat-sealing time is reached, the heat-sealing indicator light goes out,indicating that the heat-sealing is over, and the next packaging cycle is ready.